This item is being sold as an unfinished kit in Maple or Birch.
This is my standard Full Panel bed. The Bookcase bed has two fold over the front cabinets. I add a caster under the moving cabinets in case they are over filled with excessive weight. Each bookcase is 82 inches high by 29 inches wide by 9 inches deep. Pictures or mirrors could be added to the back side of the moving cabinets.These bookcases are held to the main cabinet by a brass piano hinge the full length of the cabinet. Each shelf is pocket screwed into the side verticals and the back. I make the back out of 1/2 Birch plywood finished on both sides. All exposed edges are edgebanded and sanded with real Birch or Maple veneer.It is rabbited into the verticals for strength.The bed is 1 1/2 deeper than normal to accommodate the handle. This model is stained cherry and has three coats of water based polyurethane. The width of the bed closed is 59 inches without crown moulding. "The width open and still being able to take the bed down is 78 inches." The total width of the unit open is 118 inches. The total this unit projects into the room is 26 inches.I also offer fold down nightstands that attach to the back of the swinging cabinets and crown moulding and reading lights.
Crown moulding is sold separately at $125.00 unfinished. It can be seen here. I put small hinges on each cut end to hold the joint together tight.I also sell two brass or black 3 3/8 inch recessed can lights for $120.00 with a high quality on-off switch.
Please read the description on the regular Panel Bed Full for $1,200.00 in my store so you have a clear idea about the Panel Bed. I have been building and installing these beds for over 10 years.
This bed now sold with a metal frame instead of the wood doors. It is a waste for most people to cover them up with the front cabinets. See metal frames and Bunkie boards. Call 505-470-8902 Thanks Dan
This is my standard Full Panel bed. The Bookcase bed has two fold over the front cabinets. I add a caster under the moving cabinets in case they are over filled with excessive weight. Each bookcase is 82 inches high by 29 inches wide by 9 inches deep. Pictures or mirrors could be added to the back side of the moving cabinets.These bookcases are held to the main cabinet by a brass piano hinge the full length of the cabinet. Each shelf is pocket screwed into the side verticals and the back. I make the back out of 1/2 Birch plywood finished on both sides. All exposed edges are edgebanded and sanded with real Birch or Maple veneer.It is rabbited into the verticals for strength.The bed is 1 1/2 deeper than normal to accommodate the handle. This model is stained cherry and has three coats of water based polyurethane. The width of the bed closed is 59 inches without crown moulding. "The width open and still being able to take the bed down is 78 inches." The total width of the unit open is 118 inches. The total this unit projects into the room is 26 inches.I also offer fold down nightstands that attach to the back of the swinging cabinets and crown moulding and reading lights.
Crown moulding is sold separately at $125.00 unfinished. It can be seen here. I put small hinges on each cut end to hold the joint together tight.I also sell two brass or black 3 3/8 inch recessed can lights for $120.00 with a high quality on-off switch.
Please read the description on the regular Panel Bed Full for $1,200.00 in my store so you have a clear idea about the Panel Bed. I have been building and installing these beds for over 10 years.
This bed now sold with a metal frame instead of the wood doors. It is a waste for most people to cover them up with the front cabinets. See metal frames and Bunkie boards. Call 505-470-8902 Thanks Dan
Murphy Panel Bookcase Bed Queen Do It Yourself Kit (High Quality Birch)
|
This is the Queen Panel Bed with Bookcase: unfinished kit in Maple or Birch.
This is my standard Queen Panel bed. The Bookcase bed has two fold over the front cabinets. I add a caster under the moving cabinets in case they are over filled with excessive weight. Each bookcase is inches high by inches wide by inches deep. Pictures or mirrors could be added to the back side of the moving cabinets.These bookcases are held to the main cabinet by a brass piano hinge the full length of the cabinet. Each shelf is pocket screwed into the side verticals and the back. I make the back out of 1/2 Birch plywood finished on both sides. All exposed edges are edgebanded and sanded with real Birch or Maple veneer.It is rabbited into the verticals for strength.The bed is 1 1/2 deeper than normal to accommodate the handle. This model is stained cherry and has three coats of water based polyurethane. The width of the bed closed is inches without crown moulding. "The width open and still being able to take the bed down is inches." The total width of the unit open is 118 inches. The total this unit projects into the room is 26 inches.I also offer fold down nightstands that attach to the back of the swinging cabinets and crown moulding and reading lights.This bed now sold with metal frame and Bunkie board instead of doors. It is a waste of time and money to build doors just to cover them up. See metal frames and Bunkie boards. Thanks Dan 505-470-8902 |
Queen Panel Bed with Bookcase: Item #118Kit price: $1,850.00
Dimensions: 123 inches wide by 87 inches tall by 26 inches deep. Bookcase is 31 1/2 inches wide by 87 inches high by 9 inches deep. Online price includes ground shipping cost of $225 within the US. For local delivery or pick up, or shipping outside the US, please contact us before placing your order. |
