Murphy Panel Bookcase Bed FULL Cutsheet, Plans, Pictures and Hardware
Birch or Oak Panel Bookcase bed
Best Deal On the Internet
High Quality Low Price
This item is being sold as unfinished, full size panel bookcase bed kit in Maple or Birch. This is my standard Full Panel bed. The Bookcase bed has two fold over the front cabinets. I add a caster under the moving cabinets in case they are over filled with excessive weight. Each bookcase is 82 inches high by 29 inches wide by 9 inches deep. Pictures or mirrors could be added to the back side of the moving cabinets.These bookcases are held to the main cabinet by a brass piano hinge the full length of the cabinet. Each shelf is pocket screwed into the side verticals and the back. I make the back out of 1/2 Birch plywood finished on both sides. All exposed edges are edgebanded and sanded with real Birch or Maple veneer.It is rabbited into the verticals for strength.The bed is 1 1/2 deeper than normal to accomadate the handle. This model is stained cherry and has three coats of water based polyurethane. The width of the bed closed is 59 inches without crown moulding. "The width open and still being able to take the bed down is 78 inches." The total width of the unit open is 118 inches. The total this unit projects into the room is 26 inches.I also offer fold down nightstands that attach to the back of the swinging cabinets and crown moulding and reading lights.
Crown moulding is sold separetely at $125.00 unfinished. It can be seen in my store www.bergmanwoodworking.com. I put small hinges on each cut end to hold the joint together tight.I also sell two brass or black 3 3/8 inch recessed can lights for $120.00 with a high quality on-off switch.Please read the discription on the regular Panel Bed Full for $1,200.00 in my store so you have a clear idea about the Panel Bed. I have been building and installing these beds for over 10 years.
Do some research and give me a call about what you thing of my products and prices.
This is also sold with the metal frame instead of the panel panel style for the same price, but the metal frame needs to be bolted to the floor. Call 505-424-3634 Thanks Dan